Bearman.
My GG has the 25mm Shiver front forks so the only wheels that would be avail for the 25 would be the KTM or the Husky.
I had 2 reasons for using the DRZ rear. But first, before I started all of this I had a DRZsm. So, before even beginning the project, I thought I would see if I could fit the DRZ wheel to the GasGas. I did get it to fit so I continued with the project.
The DRZ rear will allow for a 36t rear sprocket. The other reason was that I had bought online 17" LC4 front and rear wheels. The rear wheel with its cush drive was put on my DRZ. It also would have fit the GG, but with its 5" wheel it would not have been as good a fit as the DRZ wheel was.
The DRZ sm with the cush hub and its heavier weight makes for a perfect long distance bike.
The rear axle of the GG is a 20mm axle and so are most other bikes so fitting the rear is more a matter of just finding something with similar sprocket to rotor distances.
Tony
|