View Single Post
  #13  
Old 02-24-2009, 01:51 PM
rpduc rpduc is offline
Senior Member
 
Join Date: Feb 2008
Location: Minnesota
Posts: 419
Default

So the inner races and balls blew out and you've still got an outer race stuck in there?

Those bearings musta really been shot...

I assume you can't get a drift to bite on anything to drive the race out from the opposite side?

Maybe get in there with a Dremel and grind some flats on the inside of the race so you've got something to hook your drift on?

I don't think you can get it hot enough to "fook" it up with a hot air gun. The paint would bubble before you did any damage to the alu hub. Make sure you're applying heat to the hub, NOT the race. Try dosing it with some penetrating oil too.
__________________
Ross
'05 MC 250
'91 Husky 610wxe
'04 Duc M800 R.I.P
'06 Duc S2r 1000 R.I.P
'07 Duc S2r 1000 still rubber side down...
----------------------------------------------------------
May be so... May be not so...

My Website
Reply With Quote