View Single Post
  #12  
Old 04-30-2018, 09:59 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

I used 10 guage wire.
I crimped the terminal end on the wire, put some liquid electrical tape on the joint, then heat shrinked the connection.

I cut the front mounting point off on the plastic cover. That way I would get a better grounding point.


A zip tie was used on the front for good measure.

Last edited by gasgasman; 05-01-2018 at 08:04 PM.
Reply With Quote