Im around 105kg (235lb) in the nip.
On my 2011 im running 5.8 on the rear and have to crank the preload to get close to 110sag, yet my mates 5.2 on his 2003 yields similar results! Going to pull the linkages and see if there is a difference.
SSS on the front with 0.44 springs are beating the life out of me (fast or slow speeds) no better than my 45mm marzocchis at the min for my use.
I think I need to go to 6.0/6.2 on the back to back off the preload and keep the head angle right so the forks work properly at the same time increasing the front to 0.48/0.5.
|