View Single Post
  #1  
Old 09-10-2018, 02:09 AM
icebergstu icebergstu is offline
Member
 
Join Date: Aug 2018
Posts: 21
Default Jetting masters needed...

Hey guys,

BIKE - 2005 EC300 Fresh top end 1 ride old

PLUG - BP5EY 1 ride old

Jetting:

Pilot - 40
Mains - 172
Needle - N1EG top clip

FUEL - 40:1 Motul 800 Shell Vortex 98 octane

Plug is black

Blows lots of smoke

Spooge from barrel breather and bad from exhaust tip.

It was the first time I have ever ridden the bike so I have no idea what they ride like.

Most of the day ridden in 1st or 2nd gear through tight mountainous single trail at between 200 and 600 meters.

Temp was about 18c

Bike needed to clear itself after the tight stuff on fire trails and showed hesitation.

Loads of power on the pipe but not a lot down low. Still lugged well.

Started 1st kick so easily its amazing which is apparently common so I've read?


I've never seen a needle on 1st clip position which I thought was the leanest yet this spooge is crazy!

Thinking about this setup?

38 pilot
170 mains
CCK needle 3rd pos
(Maybe CCL?)
50:1

Check the pics and tell me your thoughts...

Stu

Sent from my SM-N950F using Tapatalk
Reply With Quote