Bike year & model = 2011 EC300E fitted with 36mm carb and reed block spacer
Temperature (degF) = 60 - 70 F, 0% humidity?
Elevation (feet) = 1000f, or 150-400m
Main jet = 165
Pilot jet = 42
Needle & notch =NEDW #2
Air screw setting = 1.5 turns out
Throttle valve/slide = 6.5 notched
Results:
Good throttle response throughout rev range. Smooth transition between circuits. Pulls hard off the bottom through mid range to top end. Slight knock/pinging and feels slightly lean around 1/8 to 1/4 throttle. Slightly snappy right off the bottom too and on occasion would hang slightly just above idle for a second or two.
|