Cheers John,
NOZH is the same taper profile as the N1Ex but half a clip position leaner. I find it interesting that GG is actually using a leaner needle in their 200s than they are in the 300s.
I played with that taper profile in my 300 and the 1st taper was always too rich. I never even bothered with the 250 top end, but I'm not surprised it runs alright in the 200. Generally the smaller bores will require richer jetting. Your spooge could be from the first taper, but more likely its just the fmf spoogecannon q-series silencer, especially considering you said its running well. Thats the most important part of it all.
