View Single Post
  #5  
Old 10-01-2012, 10:16 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,601
Default

I run the low speed out 8 to 12 clicks, and have the high speed sensitivity set at 1 turn out (.5 turn more sensitive, 1.5 is stock). This gives minimal resistance until you hit something that deflects the wheel, then it comes on hard. This is what will save you, and why I would only run the Scotts or the Fastway(same operation). If I'm riding in sand at medium to high speeds I'll crank up the low speed to 4 - 6 clicks out, but turn it back down when back in the woods.
Reply With Quote