Quote:
Originally Posted by (F5)
YZ Clamps with blocks added. So there's a bolt from the bottom which is the main strength + they are butted up against the curved clamp. they are also tacked to the old stops & a bit at the bottom. They bear on the frame with a wide contact patch, I might have to face the surface so they hit evenly but there is plenty of meat.
Have the races in the freezer so might slam those in tonight, press on the bearings & this could go together.
|
So far this looks like the most viable to me. Any chance you could measure them at all??
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear
2016 RM-Z450
|