View Single Post
  #9  
Old 04-08-2020, 01:35 PM
ssaulnier's Avatar
ssaulnier ssaulnier is offline
Silver Level Site Supporter
 
Join Date: Oct 2017
Location: San Antonio, Texas
Posts: 79
Default

One more detail. When I drained the fork outer oil I measured about 320mm. So I used 320mm of the 5 wt Honda HP fork oil with the new springs.

I did not replace the inner cartridge oil yet since my kitchen pass was expiring near the end of this springs project. Outer oil was pretty clean, but did have some minimal darkening.
Reply With Quote