View Single Post
  #6  
Old 06-02-2013, 08:14 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Make sure your T clamps are not over torqued, and the fork/wheel,is aligned properly. Have you serviced the fork yet? If not do so, they are not always filled and bled properly. Stock springs should be good for your weight. Stock preload is 5mm, I prefer less, as you can always dial in more effective preload with PFP. I think stock valving is tame, lots of bleed. It could also be a rebound spike that you interpret as a compression problem. Lots to consider here I know. All this said, it's a CC fork and inherently stiffer than an open chamber fork if that is what you are used to.
It's a good fork that does not deflect, but has a firm, serious ride.

Sent from my iPad using Tapatalk HD
Reply With Quote