Quote:
Originally Posted by Jakobi
Bugger me..
Combustion chamber cc's at 21.5cc
250cc piston dome has always been around 6.6cc
Volume of 1mm squish clearance is 3.46cc
Total trapped Volume 21.5 - 6.6 + 3.46 = 18.36
Compression Ratio (18.36 + 249)/18.36 = 14.56
Bit high I think..
If.. it was cut to 1.25mm as requested the ratio would down to 13.93:1 ...which is where my old 2010 was set. Last bike was 13.2:1
So so so.. Where to from here.
|
I?d be sending it back. If you asked for 1.25mm it should be close at least.