Thanks to Jacob and Doc Brown
So rode this weekend with the changes made by Jacob and Doc Brown. So here I am with a 180 main, 42 pilot and an NEDW needle. Idle screw was too far in made that adjustment and tired it out around the house seemed good. Did a ride this weekend and bike ran wheel. A bit of spoog around the exhaust, just enough to tell me it made the trip. I did experience a bit of a hanging idle after lugging the bike for very long sections but it cleared up after a few seconds of idling.
I am going to tear the bike down at this point check the squish and figure out if I am going to cut the head or buy the RK tech head.
So thanks for the help guys.
|