Thread: Is clutch basket position critical on re-assembly
View Single Post
  #1  
Old 04-06-2012, 06:21 AM
hillbilly's Avatar
hillbilly hillbilly is offline
Member
  
Join Date: May 2010
Location: lowestoft,suffolk, UK
Posts: 39
Default Is clutch basket position critical on re-assembly
Rebuilding 300 after main bearing failure. Read workshop manual after stripping, oops, and it states mark clutch basket before removal to ensure correct position on re-assembly. I didn't mark it! I cant see anything that requires alignment on assembly but have I missed something. Any advice welcome.
cheers, Simon
Reply With Quote