Bike year & model = 2011 EC300E fitted with 36mm carb and reed block spacer and fitted with modified head (squish - 1.28mm, compression ratio - 12.7:1)
Temperature (degC) = 20 degC, 100% humidity (light rain all day)
Elevation (feet) = 1000f, or 200 -500m
Main jet = 168
Pilot jet = 38
Needle & notch =JD Blue #3
Air screw setting = 1.5 turns out
Throttle valve/slide = 6.5 notched
Results:
Great torque off the bottom. Pulls from right down low below stalling point. Pulls strong and smooth through all circuits. Rich burble between 1/8 and 1/4 throttle. Pulled hard from bottom through mid and then transitioned noticeably but not too strongly onto the pipe. May indicate going from rich through the middle into crisp up top. May try and drop the needle to clip #2.
|