View Single Post
  #12  
Old 06-06-2018, 12:17 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

I have a dual map on my 2000 XC300 with the big bore kit. The difference is distinctive but not huge.

To retrofit the dual map onto an older bike you will either need to buy the GG harness or build your own. The dual map has the later generation single multiwire plug where the older unit had individual connectors for the leads.

Ejas- I would check to make sure your switch / circuit is actually working as measured at the CDI connector. Maybe you have a broken wire, disconnected plug or bad switch. You can bypass the handle bar switch and plug or unplug the two terminals next to the CDI.
Reply With Quote