Quote:
Originally Posted by GMP
With reference to the stacks provided, not to what you have, remove the 12 mm bleed shims from the comp, mid, and rebound stacks. Move the two 12x.1s you removed from the face of the comp behind the two 36s. This will make a nice two stage stack that works well in the rocks. If your in the woods most of the time run the spring preload as low as you can and the outer chamber oil around 300cc.
Sent from my iPad using Tapatalk HD
|
Sorry for digging up this old thread, but I'm about to modify the stack during next service to get a bit better feel to the forks (too harsh on rocks at the moment). In "Move the two 12x.1s you removed from the face of the comp behind the two 36s." did you actually mean two 32's? So the comp stack would be:
2 x 11 x 0,20
18 x 0,15
20 x 0,10
22 x 0,10
24 x 0,10
26 x 0,15
2 x 12 x 0,10
2 x 32 x 0,15
(piston)