Hi guys thanks for the reply much appreciated.
I do use MOTUL mineral oil so I will try the other version thanks (F5).
I adjusted the screw also whilst trying other things but with no difference Thanks Mikeyx.
Man I have used Motul mineral oil but i will try other version like ( F5 ) said. I have DP clutch kit which was supplied by a GASGAS dealership, could these be the issue? the clutch was dragging before I changed it?
I tried again tonight to bleed the system I had constant air bubbles coming out even with the use of the vacuum bleeder. I also tried the old fashion way of bleeding only using the master open/closing the nipple but still no luck.
I also changed the seals on the slave (bottom slave) to be sure it wasn't leaking through but still no luck.
anymore ideas guys I would appreciate it.
Thanks
|