Eric,
I'll try and find the photo I posted on the Smackover site some time ago. I use an equivalent of the lower pipe mount vibration isolator, but get them much cheaper from an industrial supplier. I'll get the part#. Male end into the GP brace with loctite. Cut the tit off the shroud, and drill an M6 clearance hole. Use a wide head M6 bolt(I use aluminum helmet visor bolts) to bolt the shroud to the isolator. This works very well, really stiffens things up and pulls the front edges of the shrouds in slightly. The rubber isolator flexes so the plastic doesn't crack, but is still strong. Only broke one in the past year, in a pretty severe crash two weeks ago.
|