View Single Post
  #6  
Old 01-19-2014, 08:46 PM
toadl toadl is offline
Member
 
Join Date: Jan 2014
Posts: 63
Default

Quote:
Originally Posted by Jakobi View Post
Tried doubling up the weight just as a control?

Stock springs are usually around the .42 to .44 range on the gassers. Not uncommon for most to go a little firmer again.
I measured the other fork and it was a little firmer, .37. I'm going to try doubling the weight to see if I get better results. I ordered new springs, .44, so when I get the old springs out I'll get a better idea of why they are measuring low and when I put the new springs in I'll show you how this is supposed to work.
Reply With Quote