View Single Post
  #2  
Old 10-13-2019, 12:56 PM
TGM_OFFROAD TGM_OFFROAD is offline
Senior Member
 
Join Date: Aug 2019
Posts: 117
Default

Quote:
Originally Posted by BenS View Post
My 2019 EC300 starter has stopped working properly on only the second day of riding, so I'm going to do the "wet mod", but I want to pull the bendix out to make sure that nothing is binding.
The problem is that I can't get the Bendix cover off! Do I have to pull the circlip out(part 22 in pic) first, before disassembly, or should the cover come off easily?
The cover just has three bolts and pops right off. It sits on there pretty tight so it takes a little effort. In the lower front corner there is a little tab you can use to lightly pry it. I usually just use the open end of a 10mm wrench
Reply With Quote