I replaced the rear brake disk and pads. The disk has been with me for a long time. I think (although not 100% certain) this is the first time I replace it on this bike (270 hours). Minimum thickness limit is stated as 3.5mm, mine was 2.5, so it was time for some work there. The old disk was Galfer, the new one is NG.
The new pads are named Delta DB2310. Delta is a brand unknown to me, but sold by the Norwegian GG importer. Developed in the Netherlands, produced in the Czech Republic. Seems OK.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|