No worries. Hope it helps a bit. Had my fair share of challenges along the way and spent about 4 times longer than I should. Pull things apart and put them back together 3 times just to be sure its right.
Speaking of which, I've noticed the PV governor and actuator seem to have more resistance at some points in its action than others. Like the spring doesn't offer even resistance all the way around. One side feels really good. The other feels a bit slack but still comes back to the stop. Is that normal or should I pull it back out and double check everything again? It also seems to feel a bit more slack if I lay the engine on its side as opposed to standing up. I'm thinking it might come good once I put the outer cover back on and locate the other end of the shaft in its bearing.