View Single Post
  #2  
Old 07-14-2011, 06:12 PM
MJC MJC is offline
Senior Member
 
Join Date: Oct 2010
Posts: 139
Default

11' 250xc, upstate New York 150'- 2500'

pilot=42

needle=nedw 3rd (optional needle from an late model Suzuki rm 250) For the 300 I would use an NEDJ(half a step leaner) needle in the 3rd.

main=172

AS= 2 turns out

Stock #7 slide

I couldn't be happier with the jetting. It's crisp and clean from top to bottom, and the plug looks perfect.

The CC* and DD* series needles are gas hogs. I could not even go 32 miles on a tank of gas with either needle at race pace(A-Vet). They also hurt the topend and the bikes ability to climb back into the topend when the throttle is chopped. It felt like the bike needed a lot more clutching. But the one good thing about those needles is that they are smooooooth. The Stock needle is a throw away.
Reply With Quote