to remove bearing from case. make sure ignition seal is out.
break the polyamide cage and remove rollers/cage.
heat case gently with mapp/propane. it doesn't take much. i could still almost touch it with my finger...
from the ignition side, with a big flat screwdriver or flat edged drift. round one won't work. chisel may cut bearing and not really work. catch the lip of the bearing, and give a wack. rotate 180 and repeat. it came out pretty easy. use a rag to stop from marring any surfaces.
__________________
07 ec300
was 00 xc200 now a 00 xc300. now parting out.
99 ec300 (now a pile of parts which are for sale)
Stainless Cycle - Motorcycle Bolt Kits
www.stainlesscycle.com
|