Just pulled my float apart and measured 6.5mm on a brand new carb, 11 EC300 never ridden. I did notice that it dribbled a little bit when on the sidestand with a full float bowl. I bent the tab slighty to raise the float height to 8mm, hoping that this will clean up a spilling fuel issue. Checking the Keihin website I came up with a float height of 6.5 mm for the PWM carb, whick I think is right considering they still speck 16mm for the old screw top air striker. Gonna try a break-in ride tomorrow and see if there is a fuel starvation issue however I don't expect a lot of WOT.
|