Quote:
Originally Posted by MattR
Rick, you are correct on the carb air screw adjustment since I had RB Designs modify my carb.
Firffighter, you noticed my ultra-stealth small screw driver zip-tied to my subframe. It works great on standard carbs without the RB Design adjuster screw and front/rear suspension clickers. The rear shock can be tricky but still accessible to turn the rebound adjuster screw. It also is good for bleeding the fork screws if you don't have the quick-bleeder valves.
Moto7man, I always paint mark my bolts/nuts. It provides a quick visual to see if any has loosened. Plus, when I disassemble and re-torque the bolts/nuts, typically my torque wrench is clicking off very close to the previous mark as a double-check for me.
|
Very impressive preparation, thanks for sharing the information!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300
"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
"I think best when I have a wrench in my hands." Soichiro Honda
"Dreams are messages from the deep."
-Unknown Sardaukar
|