04 EC300 jetting?
Just bought this bike a while back.
Finally pulled the carb to see what I had in there:
Pilot- 40
Air screw - 2 1/2+ turns out
Main- 178
Needle- N1EF clip at the top (leanest)
Slide- 7
I live in Stillwater, OK. Altitude around 900ft.
Bike seems slightly rich. Whenever I get into an opening where I can really get on it it seems as though it takes a minute to clean out and pull hard.
I just put a 35 pilot in it and it seems a little better but this was a quick run up and down the street at temperature near 100 degrees.
Just wondering what works for you guys. Have heard good things about LTR.
Post em up!
Thanks, Derek
|