Shimmed the valves and they are within spec. Intakes is at .14 and. 15 and exhaust .26 and .28.
Bike fired right up and sounded good, let it warm up and shut her down then no fire again. This time though it sounds like its almost there. It almost turns over hot and fires but just won't fully commit.
Difference this time around is if I let it sit for 5-10min it will fire back up where as before the motor had to completely cooled down. Basically a few hours or even just had to wait till the next day. I warmed it up and checked spark and its very strong. It almost seems like something is getting heat soaked and causing the no start. Still going through the bike and checking grounds but what else? Coolant sensor seems to be working according to the multimeter as temp goes up resistance goes down.
|