Quote:
Originally Posted by gassybill
hey man just posting to say i feel you.
i have similar issues to yours.
0 to 1/8 throttle if i roll on throttle then back off it stalls. seems to be rich.
the alignment to the airbox boot is pretty poor. because im taking the carb on and off so much the fastners are getting worn out and the airbox is getting cut by the gear clamp.
one tip for you though. if you loosen the fastners on both sides of the carb then you can rotate the top towards you undo the cap remove the slide, then you can rotate the carb the other way to get at the bottom screws and bowl. this way you dont have to remove the exhaust and the subframe
anyways good luck. ill be posting a new thread with the details of my own woes
|
Okay - I thought that there might be an issue w/ the subframe alignment, as the compatibility is so poor, and the airbox is pretty much solid in its own location. Thanks.