[Gasser Nate]

Fit up a thermo fan off a Kick Till Monday to my axp braces. Needed a little work around but fits in there!
I ordered some AS3 silicone hoses in the thermo delete option to go with but they dicked me around twice with unavailabilities. So replaced the thermo side hose with a straight bit of heater hose until I can get some in.

I also added a manual switch and ordered a lower temperature switching thermoswitch as 100 degrees is a little high for a 2t, and I'd like to be able to preemptively switch the fan on before the cooking starts in the technical stuff. I do think that the higher flow without the thermostat would almost be enough anyway.

The gasser has never boiled but I can feel it getting hot and there is a tiny bit of pipe knock/pinging when it is.