[MattR]

Originally Posted by Brian VT

Right here: http://www.gasgasrider.org/torque_table.jpg
That may be for WP but should be good for 'zokes too.

Yes, that table was developed back when the WP forks were on the bike. I talked with Glenn (GMP) about the Marzocchi forks and the lower bolt torque should be reduced slightly (helps prevent binding/friction).

WP forks:
Triple clamp upper bolt = 20 N-m / 15 Ft-lb
Triple clamp lower bolt = 16 N-m / 12 Ft-lb

Marzocchi forks:
Triple clamp upper bolt = 20 N-m / 15 Ft-lb
Triple clamp lower bolt = 12 N-m / 9 Ft-lb