Quote:
Originally Posted by adddy
i to have been going round in circles bleeding.. with new seals top & bottom & hose,
iv been squeezing, pumping, vacing, pushing,taping,elevating,dangling,rotating & pushing the pistons independently & only see odd occasional bubbles , some tinny or regular size ..but only getting the leaver to be firm... & not hard... eg two fingers will still pull to my knuckles have been over a month on this dilemma ..nissin calliper + lever
|
Bad seals in either cal or pump.
if you have ever got a new bike, and try to bleed the brakes.. takes 1-3 seconds. Ive got problems with the seals on my nissin myself.