Quote:
Originally Posted by GMP
Funny you should ask, I have .46/5.6 combo on the way. I'm 176 naked, 205 ready to race, no tools, just water pack. (gear adds up!) Top 3 BSSR rider. I never bottom the bike hard, but I do use all the travel in the bigger bumps. Sounds stiffer than I would normally try, but I'm going to trust our buddy Steve here and give it a go. Light preload on both ends and drop the oil in the fork outer a little.
|
I know its not a 2012 model, but thats the same logic I applied with the TTX setup on my 2010. .46 front and 5.4 rear. 3mm preload on the front and 12mm on the rear. Bike sits up in its stroke very nicely. The forks are great, but the shock still needs some valving. Pretty sure its valved right on if you're into MX. Too stiff in the initial part of the stroke for bush work.