Quote:
Originally Posted by rupecopp
You sure, wasn't doing that before it was rebuilt.
|
rupecopp,
Am I sure that is your problem....? Well no...., but I was trying to indicate that it sounds lean to me.
Bringing the rebuild into the picture, I would suggest that you look for a intake air leak or base gasket leak as well.
And as Nick said, it could be possible that the jetting for the worn motor (before the rebuild) is not right for a fresh top end.
The key here is "it didn't do it until the rebuild", so what has changed? You might want to retrace your steps.
Ron