View Single Post
  #7  
Old 04-20-2017, 03:22 PM
webmaster's Avatar
webmaster webmaster is online now
Administrator
 
Join Date: Jul 2006
Location: Portland, Oregon, U.S.A.
Posts: 1,787
Default

Quote:
Originally Posted by Halcon View Post
Update_ Got a NEDW needle and that has really helped things out. I am now running the NEDW needle on the second clip, 168 main and 40 pilot, air screw at 2.5 turns out. I suspect that I am still a bit rich on the pilot as it starts from cold without the choke. Think I may try a 38 pilot to clean up the last little burble. I'm at 3500' and temp was about 12 C during testing. My riding area is higher and its finally getting warmer in the frozen North so a bit leaner should help. If anyone has any suggestions I'm happy to hear them, thanks,
Did you back off the idle and reset your air screw when you swapped to the new needle? if you didn't reset these after swapping needles it will be "off" - you will still be "pulling over"... Where is your idle screw at now - is it still nearly "coil bound" (all the way in)?


It might also help to know which slide your bike has...

jeff
__________________
Reply With Quote