Quote:
Originally Posted by Elvis74
That's the reason why I changed back to the boyesen. No daylight here.
|
My 06 EC200 has what I understand to be boyesen reeds: yellow colour / 3 screw holes / 2 part reed with 2 holes for the mixture to pass through.
Can anyone confirm that the smaller part of the reed should seal completely to the 'base' larger part of the reed ?
I'm trying to trace the cause of it feeling too rich off tickover regardless of airscrew setting. I'm fairly sure fatigued reeds are the cause because the reed on the upper side of the block seals completely, but the lower reed stays 1mm + open.