For the vents routed to the airbox, I used a small medicine container. You could use a 35mm film container too. Just put a hole in the bottom and route your vent tubes into the container. I put some pillow stuffing inside the bottle to filter, but some foam would do the same. Then, I put the cap on which had a hole in it so it could breathe.
Here is a pic of mine installed.
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
|