View Single Post
  #338  
Old 06-14-2020, 06:21 PM
JesseeS JesseeS is offline
Member
 
Join Date: Jun 2020
Posts: 8
Default

Quote:
Originally Posted by Jakobi View Post
If it's a 2011 with the ASII carb with the flat cap mounted by 2 M5 bolts (not the round screw on carb cap), then the float level should be 6.5-7mm

The 16mm height is from the older carbs that had deeper bowls. See the sticky in this section.
I have the screw type cap ASI
Reply With Quote