You must NOT remove your reeds!
Perhaps they are talking of the reed spacer block installed on some (all?) 300s.
I have a Lectron on my 2015 EC200. I bought it for the 06 EC200 and carried it over when I upgraded to a newer bike.
The installation is as easy as it gets, as long as you have a proper throttle cable. I use the long version of the Motion Pro KTM cable.
I do not use the cable choke on the Lectron, cable chokes are known to give some trouble over time. The choke knob is a litte hard to reach, but no real problem.
__________________
Anders
"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)
2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
|