This is making sense, Neil.
So yes, both high and low circuits each need their own relay. And if my switch could handle the load, I don't need relays. Right so far?
The light is 45W and the switch is 6A = 72W. So in theory, I can go w/o relays...
I already have a high beam relay in place from my other light. Could I try the low beam without a relay, using a fuse to protect the system if it doesn't work? (my switch was cheap).
__________________
'18 GG XC 300
'05 GG DE 300
'01 GG txt 321
|