Quote:
Originally Posted by Pepperami
... Still not sure about the base gaskets though. 2 gaskets and a plastic one!!! whats that all about? How do they go?
|
I got the same thing in a gasket kit I bought from Motocross Center too.
The whole stack was thinner than the stock stack, but I didn't have anything else, so I bolted it up anyways. I wrote down the thickness of the stock base gaskets and the thickness of the new stack, but I don't have the numbers at hand.
I put the plastic one between the two papers and it worked out fine - no leaks.
With the thinner stack I had to fatten up the jetting a little - went from a 40 to a 42 PJ, and from clip position 2 to 3 on JD blue needle.