Quote:
Originally Posted by nknudsen
On my 08' SSS forks (different caliper mount than your 06) I used / modified the oe GG caliper mount. One mounting hole lined up and I just welded one mounting hole shut and drilled and tapped a new one. Just get crafty if you need to.
|
Cool, yeah I'd read that post during my research. I've done a few brackets for road & roadrace bikes so I'm not that scared of it, but I could do without $80 & shipping added onto the conversion cost. Better spent on bearings for which I'll need steering & smaller ID front wheel by the looks.
I usually dummy up plates in plywood to get the holes aligned & then transpose to allly.