This is from the GasGas 2006 shop manual:
Clearance between piston and cylinder:
200 std:0.05mm , limit: 0.10mm
250 std:0.055mm , limit: 0.10mm
300 std:0.06mm , limit: 0.10mm
Ring Gap:
200 std:0.3mm , limit: 0.6mm
250 std:0.4mm , limit: 0.7mm
300 std:0.5mm , limit: 0.8mm
Cylinder Bore:
200 std:62.50mm , limit: 62.60mm
250 std:66.38mm , limit: 66.50mm
300 std:71.99mm , limit: 72.10mm
|