Quote:
Originally Posted by Dread
Thanks very much for your input, beyond the call of duty.
So that being known (N89x) what diameter (x) should i choose, do i stick with the diameter i have ? ie the H or do i need to adjust this value to compensate at all?
Sorry, I am just unsure of the effect this is will be making.
I am really pleased with how the bike is running and i don't want to back pedal.
|
Your welcome, yes stick with the H diameter since your happy with it. N89H-2 will be the same as N3EH-1. When you change the starting diameter of these needles it only changes the needles outside diameter in the area of the straight section, the remainder of the needle (tapered portion) doesn't change.
If you haven't already, give some serious consideration to going back to the second clip position with your N3EH. It could be that your slide modification was more effective in resolving your issue than the leaner clip position was. There may or may not be something to gain by back pedaling with the clip position, but you wont know for sure unless you try.