View Single Post
  #2  
Old 03-22-2018, 02:33 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Take the assembly apart, clean out the fuel inlet where the needle sits with carb cleaner and a small cotton bud. Fit a new needle and adjust float height.
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote