View Single Post
  #18  
Old 04-30-2011, 07:08 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,601
Default

Yes, you have to remove the primary side cover, but if your actuator plate is on the stop with the engine off then there is no need. If the plate is off the stop, there can be excessive movement and rattle, and in severe cases a softer low end as the PV is open slightly. My '03 was way off like this, but it is rare.
Reply With Quote