Quote:
Originally Posted by jeffs2200
I got ahold of a NEDH needle. I am currently running N3CH-2, 38 pilot, 175 main on 2011 300 with 38mm carb.
I think I will try the NEDH-3-, 40 pilot and 175 main and see how that works.
Any thoughts?
|
Hi Jeff,
Any reason you didn't get the NEDW? I found with the W diameter and a 40P I get a much more consistant idle than I did with the H and a 38.
I would start with 38 NEDH3/2 172 and start from there. The NEDx range is a triple taper which gets richer as you approach WOT and needs a leaner main. Its also leaner than the N3 range on the intial taper.
I started in clip 3 and burbled onto the needle. Lifting to clip 2 cleaned this up. If I was you, coming from the N3CH#2 I would drop the NEDH in at clip 2 also. Realistically you'll still be a half clip richer than you were in the mid.