View Single Post
  #2  
Old 10-02-2018, 04:32 PM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,235
Default

Sounds very much like a connection issue. If you've gone through all the wiring connections, then it's time to clean all the ground paths. This means stator to engine, engine to frame, and yellow/green ground wire connections to the frame.

It could be a bad solder joint on the stator connections (yellow wire), or corrosion on the stator itself. Time to get a flywheel puller.
__________________
2011 XC250E
Reply With Quote