[Nikel]

Hello.

I need to change my needle on my 300R due to wear.
I have been running with the N3EG needle, 42P and 175M for some time (Years)
AS2 model.
Sweden, 15-25C, Sealevel.

I run on our own very technical slow and quite horrible track.
Steep rocky hills with no grip, rockgardens, long muddy ditches and so on.
Never use full throttle and lots of pit turns and stepping of the bike to lift it in place.

2 issues I have had.

1:Idling.
Idles fine in the pit. On the track it goes to high idle, then very low idle after a blip.
Doesn't really care if I change the AS.

2. Fuel leak.
I might have fixed this now(Today) after reading the Awsome guide here on the Float level issue.
Maybe this was causing the issue in 1.

I tried the N1EF needle today and that thing is horrible, but not scratched.
10% throttle and bike runs nice, 11% and it shoots of like a canon.


Should I buy a new N3EG or is there something else i can try that give a very calm and strong bike in the 0-1/2 throttle range.

Thanks =)